Sand-throwing equipment in the body of any dump truck.

Информация может быть не достоверна

Sand-throwing equipment in the body of any dump truck RX-7

gritter 

Purpose: designed to work with salt, peskosolyanoy mixture with clean sand, including - with a mixture of low quality.

The volume of the dry container means m ³ - 5/7/10

The thickness of the wall of the hopper mm - 3

The number of vertical stiffeners, NY - 4/4/5

Height sieve lattice -350 mm

Bunker osnaschenzakrylkami from spilling

Coating: High internal hopper LKM.Antikorroziynaya processing surfaces: alkyd dirt 0168-00 PRIMER TEKNOLAC paint, alkyd paint surface TEKNOLAC 50 base 4 RAL with increased resistance to damage and corrosion properties

Tray peskopriomnika enlarged flow cross section for a mixture nevyskogo qualities, it consists of two parts.

Spreader disc made of steel (5 mm), 8 blades (4 mm) arranged at an angle of 45 degrees from the shaft

Disk drive Spreader IHP-80 / MS-80 manufacturer's discretion

A method of supplying material - chain conveyor 530 mm

The number of conveyor chains 2 sht-

peskopriomnika tray width - 600 mm

conveyor chains Type - Round A1.16h44 chain or PR 50.8 (at the buyer's choice)

Drive belt - hydraulic, from ROM basic vehicle by means of the hydraulic pump

Drive belt: gidrovraschatel or gear motor on the customer's choice Gidrovraschatel RPG-6300 Hydraulic MR-125 / MR-160 through the reducer: «Berma» RT300 (Italy) ‖ the manufacturer's discretion                                                                                                     «Grazioli» 5030 (45) (Italy) ‖ the manufacturer's discretion

Thrust bearings: when used with gidrovraschatelem - 80212, 80214, when used with geared motors - closed, radial ball bearings for heavily loaded, the brand - «UCP» 40212 (Italy)

Controlled spreading disc height: from 100 mm to 750

Density of spreading peskosolyanoy mixture, g / sq - 25 500

Rear protected beacon

Applicability: Trucks of Russian and foreign production